News
YCM, Your Trustworthy Partner

新闻详细

ABB- European Customer Visit YCM

(Summary description)From 22 to 24 May 2023, Finland ABB Supply Chain Manager Vesa Hukki, Finland ABB Category Manager Janne Holopainen & Hannu Paivinen, Estonia ABB SQE Nikolai Voltsihhin, a group of four people take a three-days visit to our company - LUOYANG YUNCHUAN CO., LTD (YCM).



During the inspection visit, the customers visited the entire production process of our factories, and the supporting cooperative factories related to ABB products, and they audited the company's quality management system  documents, tracked the welding of test piece on the scene and identified the welding results, and instructed the operators on site. The customer spoke highly of our company's quality assurance system and site management, and started the next cooperation project.



In 2019, YCM began to establish a partnership with ABB. After more than three years of run-in, YCM has covered most products of ABB factories in Finland and Estonia. Induction motor products can be covered to AMI 900. Synchronous motor products can be covered to AMG1120. At present, water jacket project is being started. By the end of April 2023, YCM has provided ABB a total of 548pcs AMI400, 450 and 500 frames, 48pcs AMI630 and 710 frames, and 10 sets of AMG710 and 1120 frame ends.



Through the on-site audit and candid face to face exchanges between both parties, the mutual trust and understanding have been deepened, the business partnership of mutual trust has been consolidated, and a solid foundation has been laid for further expanding the business. YCM also takes this opportunity to continue to promote quality control, to ensure the implementation of product quality standards required by ABB, to continuously and stably provide customers with satisfactory products and services, and to achieve common development of both sides.

ABB- European Customer Visit YCM

(Summary description)From 22 to 24 May 2023, Finland ABB Supply Chain Manager Vesa Hukki, Finland ABB Category Manager Janne Holopainen & Hannu Paivinen, Estonia ABB SQE Nikolai Voltsihhin, a group of four people take a three-days visit to our company - LUOYANG YUNCHUAN CO., LTD (YCM).



During the inspection visit, the customers visited the entire production process of our factories, and the supporting cooperative factories related to ABB products, and they audited the company's quality management system  documents, tracked the welding of test piece on the scene and identified the welding results, and instructed the operators on site. The customer spoke highly of our company's quality assurance system and site management, and started the next cooperation project.



In 2019, YCM began to establish a partnership with ABB. After more than three years of run-in, YCM has covered most products of ABB factories in Finland and Estonia. Induction motor products can be covered to AMI 900. Synchronous motor products can be covered to AMG1120. At present, water jacket project is being started. By the end of April 2023, YCM has provided ABB a total of 548pcs AMI400, 450 and 500 frames, 48pcs AMI630 and 710 frames, and 10 sets of AMG710 and 1120 frame ends.



Through the on-site audit and candid face to face exchanges between both parties, the mutual trust and understanding have been deepened, the business partnership of mutual trust has been consolidated, and a solid foundation has been laid for further expanding the business. YCM also takes this opportunity to continue to promote quality control, to ensure the implementation of product quality standards required by ABB, to continuously and stably provide customers with satisfactory products and services, and to achieve common development of both sides.

From 22 to 24 May 2023, Finland ABB Supply Chain Manager Vesa Hukki, Finland ABB Category Manager Janne Holopainen & Hannu Paivinen, Estonia ABB SQE Nikolai Voltsihhin, a group of four people take a three-days visit to our company - LUOYANG YUNCHUAN CO., LTD (YCM).

During the inspection visit, the customers visited the entire production process of our factories, and the supporting cooperative factories related to ABB products, and they audited the company's quality management system  documents, tracked the welding of test piece on the scene and identified the welding results, and instructed the operators on site. The customer spoke highly of our company's quality assurance system and site management, and started the next cooperation project.

In 2019, YCM began to establish a partnership with ABB. After more than three years of run-in, YCM has covered most products of ABB factories in Finland and Estonia. Induction motor products can be covered to AMI 900. Synchronous motor products can be covered to AMG1120. At present, water jacket project is being started. By the end of April 2023, YCM has provided ABB a total of 548pcs AMI400, 450 and 500 frames, 48pcs AMI630 and 710 frames, and 10 sets of AMG710 and 1120 frame ends.

Through the on-site audit and candid face to face exchanges between both parties, the mutual trust and understanding have been deepened, the business partnership of mutual trust has been consolidated, and a solid foundation has been laid for further expanding the business. YCM also takes this opportunity to continue to promote quality control, to ensure the implementation of product quality standards required by ABB, to continuously and stably provide customers with satisfactory products and services, and to achieve common development of both sides.

推荐新闻

05-26

Aviation transmission systems delivered successful

After one and a half years of research and development, the low-altitude heavy-load aircraft transmission system components were successfully delivered to the customer on May 24 and will be used for the assembly of two tilt-rotor prototypes with a load capacity of 6 ton. In the next step, the company will continue to dedicate R&D and testing resources to enrich aviation transmission chain products, expand the market for low-altitude aircraft transmission systems and build aviation transmission systems into a new business pilar.
05-18

Nordex 5. XMW high-speed coupling successfully delivered today

On May 17, 2024, 5.XMW high-speed coupling developed for Nordex SE passed the customer's on-site approval and was sent to Germany for installation for field test. This is a crucial step for YCM's high speed coupling to enter the overseas market. Nordex SE is a leading wind turbine manufacturer headquartered in Hamburg, Germany, specializing in providing high output, cost-effective wind turbines with the ranges from 4 MW to over 6 MW for mature and emerging markets for various geographical and climatic conditions. As of 2023, the company has installed approximately 50 gigawatts (GW) of wind power in over 40 mature markets worldwide. The revenue in 2023 is approximately 6.5 billion Euro. The business cooperation between YCM and Nordex has been deeply cultivated for many years. After two years of hard work, our company has completed the design, sample making, and testing of 5.XMW high-speed couplings. The customer representatives performed on-site evaluation and agreed on the shipment to the customer, which is worth celebrating. Our R&D team collaborated with functional departments to complete the design,manufacturing and delivery of the 5.XMW coupling, strengthening our understanding of foreign products and laying a solid foundation for launching the design work for 6.XMW high-speed coupling. This will greatly advance the globalization of YCM's high speed coupling business and achieve rapid and healthy business development. As one of the core businesses of YCM, coupling business has formed a series of products with a sliding torque coverage up to 180KNM, covering 1.5MW, 2XMW, 3XMW, 4XMW, 5XMW, 6XMW, 7XMW, 8XMW, 9XMW, and 15XMW. The company can provide customers with customized, reliable, and systematic coupling system solutions, better serving markets home and abroad.  
04-21

ABB Guests Visited YCM

On April 18, 2024, Kari Lollo, Senior Vice President of ABB Finland's Large Electric Motors and Generators Division, led a procurement team of Robbie Wang( SCM Director), May Song(Sourcing Leader), and Shirley Wu( Fulfillment Manager) to visit Luoyang Yun Yunchuan Co., Ltd. (YCM) for a one-day visit. Ms. Li Fushou, General Manager of YCM, led the team from Business Department, Technology Department, and Production Department to receive ABB customers. During the visit, both parties introduced their respective enterprise information and mutual needs, and had in-depth exchanges on the problems that existed in the existing cooperation. ABB guests visited the entire production process and production sites. The customer gave high praise to our company's site management. In 2020, the company began to establish a cooperative relationship with ABB and achieved serial delivery in 2021. After more than four years of running in, the company currently covers the vast majority of products from ABB's factories in Finland and Estonia. Induction motor products can be produced up to AMI900, and synchronous motor products can be produced up to AMG1120. In 2024, AMG1600, AMZ900, and AMZ710 large motor products will be added on the basis of last year. As of now, ABB has delivered a total of 873 units (sets) of products. Through this on-site visit both parties had frank communication, deepened mutual trust and understanding and look forward to the future promising partnership.
03-08

ABB Finnish Guests Visiting YCM

On March 3, 2024, Janne Holopainen, the procurement manager of ABB's Finnish factory, and Raine Kuusisto, a surface treatment specialist, came to YCM for a three-day visit. During the visit, the customer visited the entire production process of the factory and the supporting collaborative units related to ABB products. On site they track tour work shops to check the welding operation and result of its products as well as the coating of the products.  Guests provided a lot of guidance and insight to us to improve the process. The guests gave high praise to our company's quality assurance system and on-site management. In 2019, the company began to establish a cooperative relationship with ABB. After more than three years of running in, the company currently covers the vast majority of products for ABB's factories in Finland and Estonia. Induction motor/generator products can be produced up to AMI900, and synchronous motor products can be produced up to AMG1600. In 2024, several large-scale products including AMG1600, AMZ900, and AMZ710 will be added to the supply scope. Through this on-site evaluation and frank communication between both parties, mutual trust and understanding have been deepened, and the business partnership of mutual trust has been consolidated. The business plan for the end of 2024 has been confirmed. The company also takes this opportunity to upgrade quality assurance system to ensure the implementation of product quality standards required by ABB customers in order to continuously and stably provide customers with satisfactory products and services to achieve mutual development. 
Previous page
1
2
10

Contact us

Manufacturing Hub: West Fuxing Road, Luoxin Industrial Cluster Zone, Xin’an County, Luoyang 471822, Henan, China

China Technology Center : Bisheng Park, No.2 Penglai Road, Jianxi District, Luoyang 471003, Henan,China

EU office :  Kaisar Technik GmbH
Address : Frankfurt am Main, Germany
Telephone : 
+86 379 6069 5509
Hotline :   +86 185 1671 8530
Email : info@ly-ycm.com 

© 2021 Luoyang  Yun Chuan Co., Ltd.     All rights reserved.   豫ICP备19006670号-1   website designed by:300.cn   Luoyang

© 2021 Luoyang  Yun Chuan Co., Ltd. All rights reserved.  

豫ICP备19006670号-1  

website designed by:300.cn   luoyagn.300.cn